I’m thinking about upgrading my W-Fi and I was curious what wireless access points (WAP) people are using. I’m currently using a Netgear R7800 running OpenWRT.

  • cmnybo@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    1
    ·
    14 days ago

    My access points are AC Lite and and U6 Lite. Those are discontinued though.

    If I get more for inside, I would probably get the U6+. I am also thinking about getting one of the AC Mesh access points for outside. I’m not too worried about speed since anything that needs high speed is wired. I don’t have any neighbors, so I have all the bands to myself. If you are in an urban area, you should probably consider one with 6GHz support.

    • agile_squirrel@lemmy.mlOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      14 days ago

      What are your thoughts on the U6+ vs U7 Pro? I’m not in an apartment so I probably don’t need 6 GHz? The U7 pro seems more modern and future proof, though but I do like the OpenWrt compatibility in case I don’t like stock firmware.

      • cmnybo@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        13 days ago

        The U6+ will nearly max out gigabit with a 160MHz channel. The U7 Pro can provide higher speeds, but keep in mind there is only room for a single 240MHz channel on 5GHz. You will need 2.5G ethernet to take advantage of the higher speeds.

        Interference from any other WiFi networks within your channel will slow things down a lot though. That makes running with channels wider than 80MHz difficult if there are any other networks in range.