I absolutely hate “smart” TVs! You can’t even buy a quality “dumb” panel anymore. I can’t convince the rest of my family and friends that the only things those smarts bring are built-in obsolescence, ads, and privacy issues.
I make it a point to NEVER connect my new 2022 LG C2 to the Internet, as any possible improvements from firmware updates will be overshadowed by garbage like ads in the UI, removal of existing features (warning: reddit link), privacy violations, possible attack vectors, non-existent security, and constant data breaches of the manufacturers that threaten to expose every bit of personal data that they suck up. Not to mention increased sluggishness after tons of unwanted “improvements” are stuffed into it over the years, as the chipset ages and can no longer cope.
I’d much rather spend a tenth of the price of my TV on a streaming box (Roku, Shield TV, etc.) and replace those after similar things happen to them in a few years. For example, the display of my OG 32-inch Sony Google TV from 2010 ($500) still works fine, but the OS has long been abandoned by both Sony and Google, and since 2015-16 even the basic things like YouTube and Chrome apps don’t work anymore. Thank goodness I can set the HDMI port as default start-up, so I don’t ever need to see the TV’s native UI, and a new Roku Streaming Stick ($45) does just fine on this 720p panel. Plus, I’m not locked into the Roku ecosystem. If they begin (continue?) enshitifying their products, there are tons of other options available at similar price.
Most people don’t replace their TVs every couple of years. Hell, my decade old 60-inch Sharp Aquos 1080p LCD TV that I bought for $2200 back in 2011 still works fine, and I only had to replace the streamer that’s been driving it twice during all this time. Sony Google TV Box -> Nvidia Shield TV 2015 -> Nvidia Shield TV 2019. I plan to keep it in my basement until it dies completely before replacing it. The Shield TV goes to the LG C2 so that I never have to see LG’s craptastic UI.
Sorry, just felt the need to vent. Would be very interested in reading community’s opinions on this topic.
Is it just me or is it really fuckin’ easy to not connect your TV to the internet?
I’ve hated “Smart TVs” for a decade now, but I solved my problem by just buying a set top streaming box (Apple TV, Nvidia Shield, etc) and leaving my TV off my WiFi.
Some smart tvs’s will whine incessantly about not having the internet.
Thankfully mine (Philips) only bitched about it for about a week, and gave up. Now the only real complaint I have with it is that it takes forever to boot, considering it has to fire up android after it’s been off.
LG doesn’t do this. They also have the good sense to allow firmware updates via USB. Which is great, because turning on WiFi long enough to install an update fills the home screen with junk.
I have an LG that is a couple years old. Never connected it to the Internet and don’t intend to but have wondered about firmware updates for it. I am afraid of an update adding ads or something else I don’t want. What is your experience? Or is there a resource that details everything (and I mean everything) that the updates change?
I’ve installed two firmware updates on my C1 and they have never added advertisements. I installed them because they both fixed specific bugs I was experiencing with my home theater system.
I don’t see why they would try to shove ads in an offline firmware update when it is both easier and more useful to download them from the internet once the device is connected. It’s hard to make money from ads when you can’t actually track user engagement.
That said I would only bother updating your TV’s firmware if there is a bug fix or feature you need from a newer version.
I also have a C1 and have been annoyed that it won’t turn on my connected AVR when I turn on the TV even though it has the capability and it turns it off when I turn the TV off. This wouldn’t happen to be one of the bugs you upgraded to fix, would it? What bugs did you encounter that you fixed with firmware upgrades?
Not OP, but what you’re referring to is called CEC control. Maybe just have a dig through your settings on both devices to check CEC is enabled.
LCD display
HDMI interface
🤪
I am aware of the CEC settings and they are working - the TV will power off the device just fine using CEC and it has the ability to power it on (I can manually trigger this) but the TV does not send a power on command to the AVR automatically when the TV is turned on. This seems to be a known issue but I don’t have a link to the forum discussion I found a while ago where others have the same problem.
The bugs I was having were related to eARC not working properly when G-Sync was enabled on my PC. I haven’t had any problems with my C1 not responding correctly to “one touch play” CEC signals from my PS5 or Apple TV.
Well I’m glad you got them fixed!
“One Touch Play”/power control/CEC settings can sometimes be buried in weird places. If one device in your chain doesn’t have it enabled, it can cause bad behavior. There are two different settings I had to make sure were enabled on my Denon AVR before devices plugged into it would turn on the TV. So I would double check in those usual places.
The only CEC related problem I’ve had with my LG has been that turning everything on with my Apple TV or Nintendo Switch will cause the PS5 to power on as well if it was the last device in use before power-off. I suspect this is actually a Sony issue, as I had it with my PS4 as well, and no other devices respond incorrectly to the one touch play signal like this.
A good place to check is avforums or avsforums. There have been a lot of CEC and ARC issues (on all brands!). And a lot of people discussing the different updates (while laughing at the useful release notes)
I personally found that CEC power on only worked when I had the amp input selected, or used ARC.
I prefer not to reward corporations by buying equipment with built-in spyware.
(Also, “easy to not connect” depends on whether the TV nags you, or disables features, or uses any open wi-fi it finds, or includes a cellular or mesh modem.)
You’re just giving the same companies even more money when you buy their much more expensive “dumb” digital signage products.
Nobody’s been able to show me a TV that actually does those other things you suggest. If one did, I wouldn’t buy it, but I won’t base my current pruchasing decisions on hypothetical future products.
No, I am not.
(And even if I was, it wouldn’t boost the sales numbers of spyware products, encouraging more of the same.)
If you don’t want to believe it’s a problem, I don’t expect anyone wants to waste their time trying to change your mind.
(Jay did report seeing examples in the wild, though.)
Who do you think makes these digital signage products? They all come from LG, Samsung, Hisense, etc.
Show me a TV that ships with a cellular modem or that connects to open wifi networks without being prompted, and I won’t buy it. I’m not the one with the burden of proof here. It’s very easy to see if a TV does any of this shit before you buy it just by checking reputable review sites like rtings. So telling people any TV they buy at Costco does this is just spreading FUD.
This honestly and embarrassingly didn’t occur to me.
I got a roku for my smart TV because I wanted something with a Jellyfin app. I don’t trust roku any more or less than Vizio, but I find I like the idea of removing internet access to the TV directly.
@beefcat
How long until they mesh with nearby stuff the way Amazon/Ring does?
@chahk
Yeah they can try and push as much BS as they want but in the end I’m never using their software and always using a shield
Isn’t it the Shield that introduced ads on the homescreen since a few years?
Yes, but one benefit of the Shield over other android based devices is that it’s pretty hackable. You can replace the launcher and get rid of the ads and while it’s more than a single click to do that it’s easy enough by following a guide.
On my older shield that had the older launcher without ads I disabled updates for the launcher and reset it to its original version all through the normal settings interface.
I tried doing the same with a FireTV without success, Amazon forces you to use their launcher unless you’re willing to put in substantial effort.