• @IMALlama@lemmy.worldEnglish
    3•3 months ago

    Are you in it to tinker with the printer and go through the build or are you in it to print things? For the former, go Voron. For the later, this seems like a good option. My 2.4 build was easily 40+ hours including figuring out what to print, assembly, wiring, etc. That said, if you want to fiddle Voron is great. There are tons and tons of user mods, an active community (discord and Voron design forums), etc. You’ll learn a ton building a printer from a ton of loose parts.

    • @nezbyte@lemmy.worldEnglish
      4•3 months ago

      Amazing how that Saturday I set aside to build a Voron2 turned into a weeklong adventure. Then the mods, troubleshooting of mods, ERCF, and building of a Trident consumed so much more time. I guess that is just Voron Life.

      • @Damage@slrpnk.netEnglish
        2•3 months ago

        It took me over 15 days to build my self-sourced V2.4.
        I had crimping PTSD for a while.

        • @ExcessShiv@lemmy.dbzer0.comEnglish
          1•2 months ago

          Getting a wire harness so I didn’t have to crimp all the wires myself is the main reason I ordered a kit instead of self-sourcing.

          • @Damage@slrpnk.netEnglish
            1•2 months ago

            Yeah but I already had the frame (paid by my previous employer) since the pre-manual days, so I HAD to go self sourced !

      • @PipedLinkBotBEnglish
        1•3 months ago

        Here is an alternative Piped link(s):

        Voron Life

        Piped is a privacy-respecting open-source alternative frontend to YouTube.

        I’m open-source; check me out at GitHub.

    • @rugburn@lemmynsfw.comEnglish
      1•3 months ago

      Tempted to do both. As much as I hated tinkering/fixing/breaking my E3V2 and the absolute bliss of my Bambu, the larger form factor, and having two of them is… going to kill my wallet.

      • @IMALlama@lemmy.worldEnglish
        2•3 months ago

        I haven’t needed to tinker with my Voron much, but I am a fiddler. Having a very capable baseline motivated me to put in the effort to go from a 90% printer to a 95% printer. Even without fiddling, it’s been a ton better than my old i3 clone ever was in terms of quality, speed, and reliability.

        I’ve only had one thing I had to fix in over 1,000 print hours and that was a wire break due to me running some ABS insulated wire in the cable chains.