You’ll get faster download, but your upload speeds drop off a cliff
Use another fan to make the wifi circular, then your upload speeds shouldnt be hindered
Then you add ping by changing the path
You can counter those with a pingpong bat.
If you play pong online, your ping will be super low.
Genius. Where’s your GoFundMe?
If you make a series of tubes, you can route from the router and reroute back to the router, creating an information highway through, what we call in comp science, a “loop”. Depending on which side you install the turbo, you can replicate the same tech your ISP charges extra for in “speed boost”. If you go bi-turbo—one in inbound and one in the outbound tubes of the loop—you can generate effectively unlimited speed, where onlyfans used in your inbound and outbound tubes limit based on their RPM. This is why I use RC plane turbines. It’s loud, but I’m streaming YT in 480.
If you put all this in a very small tube that you can easily plug into your router and your PC, then we’ve got real innovation on our hands!
I’m interested to learn more about this. Any article I could read?
Great! I can’t wait til they come to my town!
Here is an alternative Piped link(s):
https://piped.video/RXJKdh1KZ0w?feature=shared
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
That’s absurd. You don’t need to route to or from your router. That’s it’s entire job. Do you also run computations for your computer and speak on behalf of your speaker? Complete madness.
Yes I do, computers calculate okay but I’m different
I bet you fing too, you monster.
deleted by creator
I’m no expert but from my experience it is the other way around: Upload speed increased, Download speed decreased. Which makes sense because the outgoing data is boosted by the wind whereas the incoming traffic has to overcome the wind. If you want to increase download speed I suggest placing a hoover behind the router.
I am a computer programmer, this is exactly how it works. Why else do you think electronics have fans in them if not to blow fresh, crisp wifi in and stale, soggy wifi out?
Duuh so obvious and nobody realized it 🤦♂️
The trick is rewiring the outlet to 240v. More power = more signal.
Hey man, 3db is 3db
Doubling the voltage for a given circuit would result in four times the power, P = V^2 R. So 6db
P=V^2 /R
Will probably make the signal noisy, so I’d avoid this. I would recommend just putting the router in a booster seat, so it’s higher off the ground.
No no, everyone knows you’re supposed to put a mirror behind it, duh.
Funnily enough this may actually have a positive impact
People used to create tinfoil, tin can or wok based reflectors for WiFi to guide the omnidirectional signal into becoming a directional one.
I think the reflective part of some mirrors is essentially tin foil, so it probably would have a mild boosting effect in the direction of the mirror
Edit: in fact if OP’s fan has a rounded metal cage on it, you could take the front half off and you’ve basically got a WokFi setup there, with added danger
A wire in a Pringles can makes for a fabulous directional can-tenna
Also if it’s close enough, the metal of the fan itself serves as a pretty decent antennae. You can accomplish the same by taping a fork to the box!
It’s the silliest little lifehack yet wrapping a wire around a fork, then wrapping the other end around the router works so well
You’re not wrong. Matter of fact, you’re absolutely right!
Back around 2011, I used a pie pan and USB WiFi dongle to snag the neighbor’s WiFi. My pie pan contraption basically tripled the signal strength, and I never had a single dropout. 👍
i have used a long tin can, similar to a pringles can before to steal a neighbour wifi back in the day. this is legit
Modern wifi APs have beamforming algorithms. No reflector required.
Yep, and the fan moving in back almost certainly will fuck up beamforming as reflections are fairly important to get the beam to do object avoidance and if your reflective surface is angled and moving quickly…
I’ve heard about this but not had loads of time to read into how it works and how effective the algorithms are. Do you happen to know about it in depth? I’ve wondered for a while how much efficiency is actually improved by the beamforming and what the limitations are
Like I’ve read about cantennas that fire 802.11g over several hundred meters, which in my understanding is obviously is out of reach for regular WiFi antenna even with beamforming algorithms (or is it? I actually don’t know)
Read up on Yagi antennas.
Essentially you are stacking waves. If you have an array of trasmitters, you can have them send a constructive signal or a destructive signal as a signal “wave” passes them. Using this property, you can change the shape of the wave propagation. Think of it like throwing a stone in a pond, and then throwing in a second or third stone at the exact right moment to combine the ripples, creating a stronger wave in a particular direction depending on when and where you throw the stones.
Man, I’ve always wondered how yagi antennas actually managed to produce a directional beam vs something like a dipole. Your comment has really made it click for me, honestly big thanks! Very clear 5-9
Yep. Now imagine each element on the yagi antenna is its own antenna that can be triggered by a controller, instead of just being one big “dumb” antenna. Now by timing the “firing” of each antenna you can create a directional beam in pretty much any direction.
We use it for talking to distant satellites, but then we also combine arrays of large directional dish antennas with beam shaping algorithms
But how does the mirror knows what’s behind the paper?!
My boss almost saw me looking at this. Close call.
Not Safe Fan Wifi
Can confirm, I’m this guys boss
Get back to making me work!
No because the fan that is boosting the Wi-Fi to you would prevent your computer requests to the Wi-Fi box.
So while it’ll be easier for you to get a YouTube video It would be harder for you to actually type a search. 👍
Just use an electromagnet instead. Invert the polarization to attract or repell all those pesky wifi particles. This way it boost botb up and download speeds.
this is far too complicated, we just need another fan blowing back toward the router
NSFW?
If you work in IT and want to keep your job, it would be NSFW to say something like this
Reminds me of the time I worked in IT and someone put a department’s wifi access point on top of the microwave. No one fessed up to that one lol
I had a friend complaining that his new computer I built for him was crashing a lot.
So I go there and spend a good bit of time trying to make it crash. Nothing.
Then his girlfriend gets bored and picked up the wireless phone. Bam ! Computer crashed!
It had to happen another time for me to realize it crashed when she was picking up the wireless phone. Turns out the phone base was on top of the computer. Tha cpu was a AMD 950MHz and the phone a 900MHz phone. I have no ideas if the frequency is at fault or the phone base was creating bad interferences somehow but taking the phone base away from the computer finally solved the problem.
That’s so weird
I work in IT and we always say stupid shit like this to people.
May work in niche cases where passive cooling is insufficient and overeating causes Instabilität.
INSTABILITÄT!!!
I dunno, I thought that it was instabilität that causes overeating.
It’s a vicious cycle. But you already knew that, doctor.
Radio waves are faster in a vacuum, ditch the fan and put it in a shop vac.
💡
But the fan blows the air away, leaving nothing but vacuum
Ask ElectroBOOM, he would definitely make a video rectifying it
*bang*OUCH F___ S___ why is there a loose wire?I read the last part in his voice lmao
Same here. 🤣 I absolutely love when people have the skill of typing out something that your brain reads in a specific voice and manor.
yes and you can also leave out a plate of cookies where you want a strong signal so the wifi waves will go there when they’re hungry
Just don’t bring the ones from the third party, I heard they’re bad for the privvy or something.
Don’t be silly!
Wifi is not man, Wifi doesn’t eat cookies
It eats lead. That is why wifi antenna’s have a bit of lead surrounded by copper, so it can lure the wifi with the lead and catch it with the copper. Also why it stops at lead walls since it is like a buffet for them.
Putting a fan begin your router won’t boost the range because photons emitted by the router’s antenna won’t be affected by moving air from the fan. Putting a floodlight however…
Even if they were affected by any measurable amount, the photons move so much faster than the air that it’s an absolutely negligible difference incapable of being measured. It’s like 1 trillion divided by 1 trillion and 1 equaling approximately 1. The outcome is unaffected by the extra 1. It’s a non-factor. I’m trying to explain this for the future not-smart-people but I think I’m just making it much worse.
Photons?
Visible light, radio frequencies, microwaves, x-rays, infrared, ultra violet and so on are just light (photons) at different frequencies.
And your friendly EMH.
Alright, so according to Bernoulli’s principle says that moving fluids result in a lower air pressure. Light and all electromagnetic waves are fastest in a vacuum. Lower air pressure is closer to a vacuum. So… Marginally? I have no idea how much but I’m guessing it’s miniscule enough to need special equipment to detect. Not worth it. Plus the fan itself could block the waves. The fields around the wires powering the fans would have an effect as well. All of this is going to be super minor but I think the physical blockage of the fan is going to have more of an effect (but still teeny tiny) than anything.
It could be amplified by placing the router up high and using a strong ceiling fan to blow the waves downward , therefore receiving gravitational amplification
In order to be unessecary specific:
if it would benefit the waves:
it would only benefit the outgoing waves.
The waves coming back feom clients, transmitting data back to the wifi access point would have to fight against this additional airpressure.
But this is all only hypothetical and i am sure in the real world it would make no difference even if there would be a benefit in theory.
And yes you are correct the electromanetic field of the spinning fan would definitly harm and not improve the signal quality.
It’s simple. We point it away from the router except during large uploads!
No no no we make use of MIMO beamforming and let the uplink signal get reflected towards the back of the fan so it slipstreams into the router
Well… WiFi is bidirectional. It may be faster receiving but the device sending… Other story than the tcp handshakes…
